|
BeeKeeper 802.11b Wi-Fi Analysis PC Software |
PRESS KIT
HI-RES IMAGE
PRESS RELEASE |
BeeKeeper™ is a Windows® XP software application
that graphically & textually scans, monitors and logs all 2.4 GHz
802.11b Wi-Fi networks. BeeKeeper™ utilizes the BeeKeeper™ Receiver
Module monitoring all 14 DSSS network channels as well as MAC, SSID,
AP manufacturer, SNR, data rate and RSSI signal levels of any access
point or NIC. Yellowjacket® users may use their 802.11b receivers
with the Pollenator™ PC interface with BeeKeeper™ software.
User selectable scanning and log settings ensure that BeeKeeper™ will
identify any unauthorized MAC and notifies the user instantly with audible
and email alerts and time-stamped log file onto any desktop or laptop
PC. Vital RF data is captured, logged (24/7) and may be used to identify
neighboring 2.4 GHz interference, WLAN interference and even nearby client
cards trying to wirelessly “hack” into the network. In addition,
APs can be traced from local NICs in ad-hoc mode they are connected to
allowing users to view the network transparently. Unlike NIC based analyzers, BeeKeeper™ is a passive, network independent hardware & software
package with the ability to see the “whole picture” wirelessly
without being seen or detected by anyone on or off the network. BeeKeeper™ software
is controllable via any PC’s serial or ethernet port allowing RF
surveys to be performed all from your desk.
 Download BeeKeeper data sheet
Download BeeKeeper manual from the
Technical support section |
Related Products
Features
Specifications
Frequencies
Software
Options
FAQs |
back to
top |
|
|
| SURVEYS: |
- Scan & Display Devices
on ALL channels
- Display Capacity of 300
Devices
- Full 2.4 GHz 802.11b Spectrum Waveform
- MAC address, SSID, Vendor,
Signal Strength, Channel & SNR
- Single Channel Spectrum Waveform
- Passive Surveys with Calibrated
Receiver
- Channel-Wise Signal-to-Noise Display
- Network Bandwidth Utilization
for 802.11b data rates
|
| SECURITY: |
- Detection of ad-hoc mode for non-APs
- Detects WEP
encryption & client
ad-hoc mode
- Useful for SOX/DoD/GLBA/HIPAA compliance monitoring
- Detects Access
Points & Network Interface Cards
- Classification of 802.11B and
802.11BG devices
- Protocol Analysis & Packet
Classification for any device
- Flag unauthorized devices based on Access Control List
- Audible & e-mail
alerts for unauthorized devices
|
|
- Windows® XP 32, Vista 32 and Windows 7 32
- 1 GHz or faster processor
- 512 MB RAM
- 1 GB free hard drive space
- CD-ROM drive
- USB 1.1 Port
or 10/100 BASE T-Ethernet Port
- SVGA or higher
resolution (16-bit color)
|
|
|
|
2.400-2.495 Ghz |
|
|
Use
Berkeley's Pollenator PC interface with your existing Yellowjacket reciever. |
|
BeeKeeper™ monitors and logs continuously on any
Windows® PC for both realtime and time-stamped RSSI
analysis.
|
BeeKeeper™ utilizes an 802.11b calibrated
receiver for dBm accurate analysis. Yellowjacket® users
may use their receivers with Pollenator™ to interface
with BeeKeeper™.
|
|
BeeKeeper 802.11b Wi-Fi MAC Address PC Software Screen |
BeeKeeper 802.11b Wi-Fi Channel Utiization PC Software Screen |
BeeKeeper 802.11b Wi-Fi Signal-to-Noise PC Software Screen |
BeeKeeper 802.11b Wi-Fi Spectrum Analysis PC Software Screen
|
|
|
|
|
- Does
BeeKeeper work with 802.11a and 802.11g networks?
- BeeKeeper is
designed to work with BVS' 802.11b receiver but future releases
will support 802.11a, 802.11g and more..
- Can
I use my own NIC with BeeKeeper software?
- No.
BeeKeeper only works with a precision calibrated receiver. There
are no NIC cards sensitive enough for accurate measurments that
BeeKeeper provides.
|
|
